2.2KW Aluminum Brazing Furnace Tube Heating 900mm For Continuous Brazing Radiator
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Mesh Belt Transmission Speed
|200—1500mm/min(Continuously Adjustable )
|Mesh Belt Transmission Power Of Drying Area
|380V Three Phase 50HZ
|Rated Power Of Brazing Area
|Width Of Mesh Belt
|1000mm(316L Stainless Steel Braiding)
2.2KW Aluminum Brazing Furnace,
Continuous Radiator Aluminum Brazing Furnace
Radiant tube heating 900mm Face height of mesh belt Aluminum Brazing Furnace For Brazing Radiator Continuous Brazing
Product introduction about the Brazing Furnace:
Controlled atmosphere aluminum furnace system includes a spray system, a drying furnace, a set of control atmosphere brazing furnace and a cooling system.The controlled atmosphere brazing furnace has a preheating chamber with an atmosphere curtain and behind that is the brazing area from which the product will be go through a retarded cooling chamber with an atmosphere curtain to make the work-piece weld and fix . The temperature of the work-piece from the retarded cooling chamber is about 300℃ and then the temperature of the work-piece is reduced again through the air cooling chamber to make the manual operation convenient.
Product features about the Brazing Furnace:
- Fine and reasonable heating furnace partition, high precision advanced temperature control meter hardware selection and software parameter adjustment, so that the furnace temperature control precision is high (±0.2℃), the temperature difference of the product in the brazing area (575℃~650℃) is less than ±3℃;
- The heating power of drying zone is strong and has high circulation wind speed in the furnace so that can ensure the work-piece into the brazing furnace dry thoroughly without residual moisture.
- The technology of natural cooling zone in the brazing furnace ensure the weld link of aluminum brazing work-piece is fine and compact and has high welding strength of dense.
- The air cooling area has strong air cooling ability, small vibration and low noise, which can protect the operator and make indoor environment clean and comfortable to the maximum extent.
Product parameter about the Brazing Furnace:
|Normal operating temperature
|Mesh belt operating surface height
|Maximum service temperature
|Effective working size
|1000mm(Mesh belt width)×250mm(Height of mesh belt)
|Furnace temperature uniformity
|Maximum service temperature
|Temperature control mode
|PID,The work pressure regulating
|SUS316L,Wire Φ 3 mm, wear silk Φ 3.5 mm
|The channel size
|1050mm×300mm(Straight edge height)
|Temperature control zone
|6 points in Section 6 of Section 3 (temperature measurement)
|Temperature measuring point layout
|The upper and lower of each section + furnace temperature measurement
With our understanding of the industry, we have been helping foreign customers to set up radiator factories and provide the production machine in the region in the past five years. We provide customers with pre-sale and after-sale equipment design and service according to the size of our products.In the meantime we will also provide the material to our customers as well. We will send technicians to guide the installation on site to ensure the smooth production of the customer's factory, and provide free consultation service in case of any doubt in the production process.
Our company has been engaged in the manufacture and development of automobile radiator condenser products for more than 15 years. Most of the products are sold to all countries and regions in the world, and have accumulated rich production experience.Our company is good at manufacturing all the process of the radiator tank production line.In recent years,many companies from other countries in the same industry also bought the CKD from us and purchased the machine equipment from us as well.
If you are interested in setting up a radiator factory in your place or buying any products , please contact us and we will provide you with the best service and best price.
1.What’s the style of spray of the aluminum Brazing furnace machine?
The spray of the aluminum Brazing furnace machine can be divided into dry electrostatic powder spray style and aqueous solution spray style.
2.Does the aluminum Brazing furnace machine is customized or standard size?
The aluminum Brazing furnace machine is customized by customers according to their respective capacity requirements and product series specifications.
3.How to know what kinds of specifications of the aluminium brazing furnace machine should be customized?
The customers provide the productions plan ,the biggest size of the core and the dimensions of the production workshop.The engineer will give the best cost-effective solution according to the information provided.