250mm Maximum Height Aluminum Radiator Brazing Furnace 35～45m 3/H Nitrogen Consumption
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Rated Temperature Of Drying Zone||320℃±5℃||Maximum Height Of Workpiece||250mm|
|Mesh Belt Transmission Speed||200—1500mm/min||Face Height Of Mesh Belt||900mm|
|Mesh Belt Transmission Power||2.2KW|
Aluminum Radiator Brazing Furnace,
250mm Aluminum Radiator Brazing Furnace
250mm Maximum height of Work Piece Aluminum Radiator Brazing Furnace 35～45m 3/h Nitrogen consumption
Product introduction of Aluminum Brazing Furnace:
- Adopt the latest technology and high quality lining materials to ensure the heat preservation performance of the furnace body and have the remarkable effect of energy saving.
- Fine and reasonable heating furnace partition, high precision advanced temperature control meter hardware selection and software parameter adjustment, so that the furnace temperature control precision is high (±0.2℃), the temperature difference of the product in the brazing area (575℃~650℃) is less than ±3℃;
- Adoption of advanced frequency conversion speed control conveyor belt control system, so that the work-piece can achieve step-less variable transmission, precisely control the running time of work-piece in each heating zone, to ensure that the aluminum brazing heating curve accurately achieve;
Product features of Aluminum Brazing Furnace:
Controlled atmosphere aluminum furnace system includes a spray system, a drying furnace, a set of control atmosphere brazing furnace and a cooling system.The controlled atmosphere brazing furnace has a preheating chamber with an atmosphere curtain and behind that is the brazing area from which the product will be go through a retarded cooling chamber with an atmosphere curtain to make the work-piece weld and fix . The temperature of the work-piece from the retarded cooling chamber is about 300℃ and then the temperature of the work-piece is reduced again through the air cooling chamber to make the manual operation convenient.
The purchaser shall provide the cleaned and clamped work-pieces and place them on the conveyor belt, and braze them through the brazing system.
Product parameters of Aluminum Brazing Furnace:
|Mesh belt operating surface height||900mm|
|Normal operating temperature||600～650℃|
|Furnace temperature uniformity||±3℃|
|maximum service temperature||700℃|
|effective working size||1000mm(Mesh belt width)×250mm(Height of mesh belt)|
|The channel size||1050mm×300mm(Straight edge height)|
|Temperature control zone||6 points in Section 6 of Section 3 (temperature measurement)|
|Temperature measuring point layout||The upper and lower of each section + furnace temperature measurement|
|design power||380V Three phase|
|Applicable Industrie||Heat treatment|
|heating mode||resistance wire|
|length of heating zone||8M|
|conveying chain||SUS316L,Wire Φ 3 mm, wear silk Φ 3.5 mm|
Our company has been engaged in the manufacture and development of automobile radiator condenser products for more than 15 years. In recent years,many companies from other countries in the same industry also bought the CKD from us and purchased the machine equipment from us as well.
At the same time, our company provides customers with all kinds of radiator, condenser required hardware and plastic components. Ensure the supply and quality of finished products.
If you are interested in setting up a radiator factory in your place or buying any products , please contact us and we will provide you with the best service and best price.
1.Does the aluminum Brazing furnace machine is customized or standard size?
The aluminum Brazing furnace machine is customized by customers according to their respective capacity requirements and product series specifications.
2.What’s the style of spray of the aluminum Brazing furnace machine?
The spray of the aluminum Brazing furnace machine can be divided into dry electrostatic powder spray style and aqueous solution spray style.
3.How to know what kinds of specifications of the aluminium brazing furnace machine should be customized?
The customers provide the productions plan ,the biggest size of the core and the dimensions of the production workshop.The engineer will give the best cost-effective solution according to the information provided.