-
Radiator Making Machine
-
Radiator Core Builder Machine
-
Radiator Fin Forming Machine
-
Ultrasonic Cleaning Machine
-
Industrial Vacuum Packaging Machine
-
Aluminum Brazing Furnace
-
Radiator Leak Tester
-
Radiator Tube
-
Plastic Radiator Tank
-
Aluminum Foil Sheets
-
Weldable Aluminum Sheet
-
Radiator Plate
-
Metal Working Lubricant
-
Aluminum Brazing Flux
-
Radiator Components
Lining Materials Aluminum Brazing Furnace For Core 575℃~650℃ Three phase

Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xPower Supply | 380V ,Three Phase | Rated Temperature Of Drying Zone | 320℃±5℃ |
---|---|---|---|
Heating Method | Radiant Tube Heating | Maximum Height Of Workpiece | 250mm |
Mesh Belt Transmission Speed | 200—1500mm/min | ||
Highlight | Lining Materials Aluminum Brazing Furnace,Three Phase Aluminum Brazing Furnace |
High Quality Lining Materials Aluminum Brazing Furnace For Brazing Core 575℃~650℃ in the Brazing Area
Product introduction of Aluminum Brazing Furnace:
Controlled atmosphere aluminum brazing furnace system, mainly used for aluminum radiator, oil cooler, inter-cooler, heater, tube-fin condenser,the evaporator, parallel flow condenser, laminated evaporator, power station air cooler and other aluminum work-piece products that can continuously brazed in a nitrogen atmosphere.
Controlled atmosphere aluminum furnace system includes:
Spray zone, drying zone, brazing zone, cooling zone, central centralized control cabinet group and other parts,etc.
The brazing zone includes preheating chamber, heating chamber, retarded cooling chamber and air cooling chamber, etc.
Product features of Aluminum Brazing Furnace:
1.Adopting the patented energy-saving technology that developed independently by our company, the nitrogen usage amount and total power of the equipment can be reduced by 40%-50% compared with similar products
2.Setting up the device of Spray zone is simple and is easy to use as well.The nozzle can ensure that the flux of brazing parts spray sufficient and uniform;The air blower ensures that the excess flux sprayed on the brazed parts is blown off clean.
3.The heating power of drying zone is strong and has high circulation wind speed in the furnace so that can ensure the work-piece into the brazing furnace dry thoroughly without residual moisture.
Product parameters of Aluminum Brazing Furnace:
Design power | 240KW±10% |
Normal operating temperature | 600~650℃ |
Furnace temperature uniformity | ±3℃ |
maximum service temperature | 700℃ |
effective working size | 1000mm(Mesh belt width)×250mm(Height of mesh belt) |
The channel size | 1050mm×300mm(Straight edge height) |
Temperature control zone | 6 points in Section 6 of Section 3 (temperature measurement) |
Temperature measuring point layout | The upper and lower of each section + furnace temperature measurement |
Mesh belt operating surface height | 900mm |
Temperature control mode | PID,The work pressure regulating |
heating mode | resistance wire |
length of heating zone | 8M |
conveying chain | SUS316L,Wire Φ 3 mm, wear silk Φ 3.5 mm |
About us:
Our company has been engaged in the manufacture and development of automobile radiator condenser products for more than 15 years. In recent years,many companies from other countries in the same industry also bought the CKD from us and purchased the machine equipment from us as well.
At the same time, our company provides customers with all kinds of radiator, condenser required hardware and plastic components. Ensure the supply and quality of finished products.
If you are interested in setting up a radiator factory in your place or buying any products , please contact us and we will provide you with the best service and best price.
FAQ:
1.Does the aluminum Brazing furnace machine is customized or standard size?
The aluminum Brazing furnace machine is customized by customers according to their respective capacity requirements and product series specifications.
2.How to know what kinds of specifications of the aluminium brazing furnace machine should be customized?
The customers provide the productions plan ,the biggest size of the core and the dimensions of the production workshop.The engineer will give the best cost-effective solution according to the information provided.
3.What’s the style of spray of the aluminum Brazing furnace machine?
The spray of the aluminum Brazing furnace machine can be divided into dry electrostatic powder spray style and aqueous solution spray style.