Radiator Making Machine
Radiator Core Builder Machine
Radiator Fin Forming Machine
Ultrasonic Cleaning Machine
Industrial Vacuum Packaging Machine
Aluminum Brazing Furnace
Radiator Leak Tester
Plastic Radiator Tank
Aluminum Foil Sheets
Weldable Aluminum Sheet
Metal Working Lubricant
Aluminum Brazing Flux
Aluminium Radiator Brazing Furnace Hydrogen Inert Gas Controlled Atmosphere Furnace
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Use||Aluminum-aluminum Welding; Copper-copper Welding, Etc||Mesh Belt Speed||200-1000mm Depending On Furnace Size|
|Energy Medium||Electricity||Cooling Method||Water Cooling Or Air Cooling|
|Width Of Brazing Furnace||1000mm||Core Components||PLC, Motor|
Aluminium Radiator Brazing Furnace,
600mm/Min Aluminium Radiator Brazing Furnace,
Gas Controlled Aluminium Radiator Brazing Furnace
Aluminium Radiator Brazing Furnace Hydrogen Inert gas controlled atmosphere furnace Mesh Belt 150-600mm/Min
Aluminum brazing furnace system with controllable atmosphere is mainly used for continuous brazing of aluminum water tank, oil cooler, intercooler, warm air, tubular condenser, evaporator, parallel flow condenser, cascade evaporator, air cooler of power station under nitrogen protection atmosphere.
The mesh belt continuous controlled atmosphere cooper and aluminum brazing furnace is used to braze aluminum heat exchangers such as radiators, intercoolers, evaporators,
and heater radiator under protective nitrogen atmosphere.
Product quick details:
|Mesh belt operating surface height||900mm|
|Normal operating temperature||600～650℃|
|Furnace temperature uniformity||±3℃|
|maximum service temperature||700℃|
|effective working size||1000mm(Mesh belt width)×250mm(Height of mesh belt)|
|The channel size||1050mm×300mm(Straight edge height)|
|Temperature control zone||6 points in Section 6 of Section 3 (temperature measurement)|
|Temperature measuring point layout||The upper and lower of each section + furnace temperature measurement|
|Temperature control mode||PID,The work pressure regulating|
|heating mode||resistance wire|
|length of heating zone||8M|
|conveying chain||SUS316L,Wire Φ 3 mm, wear silk Φ 3.5 mm|
1. Degreasing Chamber
2. Front Curtain Chamber system
3. Heating Chamber
4. Air Cooling System
5. Rear Curtain Chamber
6. Second Air Cooling System
7. Control System
8. Fluxing Chamber
9. Drying Chamber
10. Installation, Commissioning and Customer Trainin
Our company has been engaged in the manufacture and development of automobile radiator condenser products for more than 15 years. Most of the products are sold to all countries and regions in the world, and have accumulated rich production experience.Our company is good at manufacturing all the process of the radiator tank production line.In recent years,many companies from other countries in the same industry also bought the CKD from us and purchased the machine equipment from us as well.
With the development of heat exchange industry, more and more countries and regions are committed to building local radiator condenser plants. With our understanding of the industry, we have been helping foreign customers to set up radiator factories and provide the production machine in the region in the past five years. We provide customers with pre-sale and after-sale equipment design and service according to the size of our products.In the meantime we will also provide the material to our customers as well. We will send technicians to guide the installation on site to ensure the smooth production of the customer's factory, and provide free consultation service in case of any doubt in the production process.
At the same time, our company provides customers with all kinds of radiator, condenser required hardware and plastic components. Ensure the supply and quality of finished products.
If you are interested in setting up a radiator factory in your place or buying any products , please contact us and we will provide you with the best service and best price.
1.What’s the style of spray of the aluminum Brazing furnace machine?
The spray of the aluminum Brazing furnace machine can be divided into dry electrostatic powder spray style and aqueous solution spray style.
2.Does the aluminum Brazing furnace machine is customized or standard size?
The aluminum Brazing furnace machine is customized by customers according to their respective capacity requirements and product series specifications.
3.How to know what kinds of specifications of the aluminium brazing furnace machine should be customized?
The customers provide the productions plan ,the biggest size of the core and the dimensions of the production workshop.The engineer will give the best cost-effective solution according to the information provided.