Brazing Furnace For Car Radiator Condenser Cores Max 700 degrees 380V Three Phases Radidator Furnace
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Maximum Height Of Workpiece||250mm||Mesh Belt Transmission Power||2.2KW|
|Voltage||380V Three Phase||Type||Resistance Furnace|
|Heat Source||Electric Heating (natural Gas Is Optional)|
Stainless Steel Brazing Furnace,
Car Radiator Stainless Steel Brazing Furnace
Brazing Furnace Stainless Steel for car radiator condenser cores Industrial heat Treatment
The high precision oxygen analyzer is used to provide advanced means for real-time and accurate measurement of the atmosphere in aluminum brazing furnace
The high precision oxygen analyzer is used to provide accurate measurement of the atmosphere in aluminum brazing furnace
The heating power of drying zone is strong and has high circulation wind speed in the furnace so that can ensure the work-piece into the brazing furnace dry thoroughly without residual moisture.
The technology of natural cooling zone in the brazing furnace ensure the weld link of aluminum brazing work-piece is fine and compact and has high welding strength of dense.
Product quick details:
Effective working size:1000mm(Mesh belt width)×250mm(Height of mesh belt)
316L stainless steel muffle is used for the main brazing area.
conveying chain:SUS316L,Wire Φ 3 mm, wear silk Φ 3.5 mm
Maximum service temperature:700℃
Furnace temperature uniformity:±3℃
Mesh belt operating surface height:900mm
Normal operating temperature:600～650℃
General introduction of equipment:
The brazing zone includes preheating chamber, heating chamber, retarded cooling chamber and air cooling chamber, etc.
Controlled atmosphere aluminum furnace system includes a spray system, a drying furnace, a set of control atmosphere brazing furnace and a cooling system.The controlled atmosphere brazing furnace has a preheating chamber with an atmosphere curtain and behind that is the brazing area from which the product will be go through a retarded cooling chamber with an atmosphere curtain to make the work-piece weld and fix . The temperature of the work-piece from the retarded cooling chamber is about 300℃ and then the temperature of the work-piece is reduced again through the air cooling chamber to make the manual operation convenient.
Dynamic conditions that the purchaser should have
- Water: pressure≥0.2MPa,flow≥10m³/h,temperature≤32℃:
Water quality meets the relevant requirements of industrial water, can be used circulating water
- Nitrogen:pressure:0.25～0.4MPa,consumption:60-120Nm³/h,dew-point temperature:below -70℃,oxygen content＜5ppm,purity:99.9995% or more.
- Power: three-phase five-wire AC 380V/50HZ,transformer capacity 500KVA.
Our company has been engaged in the manufacture and development of automobile radiator condenser products for more than 15 years. Most of the products are sold to all countries and regions in the world, and have accumulated rich production experience.Our company is good at manufacturing all the process of the radiator tank production line.In recent years,many companies from other countries in the same industry also bought the CKD from us and purchased the machine equipment from us as well.
We provide customers with pre-sale and after-sale equipment design and service according to the size of our products.In the meantime we will also provide the material to our customers as well. We will send technicians to guide the installation on site to ensure the smooth production of the customer's factory, and provide free consultation service in case of any doubt in the production process.
At the same time, our company provides customers with all kinds of radiator, condenser required hardware and plastic components. Ensure the supply and quality of finished products.
If you are interested in setting up a radiator factory in your place or buying any products , please contact us and we will provide you with the best service and best price.
1.What’s the style of spray of the aluminum Brazing furnace machine?
The spray of the aluminum Brazing furnace machine can be divided into dry electrostatic powder spray style and aqueous solution spray style.
2.Does the aluminum Brazing furnace machine is customized or standard size?
The aluminum Brazing furnace machine is customized by customers according to their respective capacity requirements and product series specifications.