Single Or Multi Combined Blade Radiator Fin Forming Machine Programmable 380V Power Supply

Single or Multi-combined blade Radiator Fin Forming Machine Programmable 380V Power Supply

Product introduction of Fin Forming Machine:

This machine is a special automatic processing equipment for radiator shutter rolling and forming.

The machine adopts the combination of electric control and pneumatic control to realize the automation of the processing process, with automatic control and adjustment operation of two working modes.

Automatic control, the whole machine linkage, speed control belt, pressure belt, spray, rolling window, pull off the wave, peak count and output accumulation and cut off the automatic working cycle;
When adjusting operation, each working link can be started separately, and the spindle button is set to facilitate debugging of the machine tool.

The main motor of the machine adopts frequency conversion speed regulation with a wide range of speed regulation.
The cutting wave number is controlled by servo-worm system electronic counting, which has accurate counting and strong anti-interference ability.
The tray is equipped with a holding device, flexible rotation, and is equipped with belt breaking and winding alarm protection system, can automatically stop in case of sudden failure.

Product advantages of Fin Forming Machine:

. The structure is compact and easy to operate. The traditional structure is optimized to make the structure more reasonable and the operation more convenient.

. High efficiency, low power consumption and stable performance. The improvement of precision, the reduction of wear and the optimization of structure make the overall efficiency of the machine tool improve and the performance is more stable.

. Convenient maintenance and low maintenance cost. The optimization of the structure makes the parts of the machine tool the most simplified, so that the maintenance is convenient and the maintenance cost is low.

. Stepless adjustment. It can realize stepless adjustment and break through the limitation of less gears of traditional mechanical speed regulation.

Product parameter of Fin Forming Machine:

About us:

    Our company is good at manufacturing all the process of the radiator tank production line.In recent years,many companies from other countries in the same industry also bought the CKD from us and purchased the machine equipment from us as well.

     At the same time, our company provides customers with all kinds of radiator, condenser required hardware and plastic components. Ensure the supply and quality of finished products.

      If you are interested in setting up a radiator factory in your place or buying any products , please contact us and we will provide you with the best service and best price.

FAQ:

1.Does it can change the hob?

The hob is changeable,but the main console is the same,the position where the hob installed must match with the main console.

2.Does one hob can have multiple fin sizes with different heights?

No,one set of hob only can produce single height of one fin,up and down fine-tuning height is not more than 0.1mm.