Car radiator fin making machine 0.04~0.30mm Aluminum foil thickness Fin Radiator Machine
Product introductions:
Car radiator fin making machine 0.04~0.30mm Aluminum foil thickness Fin Radiator Machine is equipped with the following devices: decoiler, tensioning device, feeding, interval oil lubrication, fin forming, correction and cuttig function, strip run-out detection, blockage detection device, cutting fault indicator, fin forming unit overloading protection device, and fault indication light.
Car radiator fin making machine 0.04~0.30mm Aluminum foil thickness Fin Radiator Machine adopts PLC, inverter, AC servo control, and touch screen control. The parameters are easily set through the touch screen.
Product features:
1.high precision
2.high speed
3.can be customized according to customer requirements of different shapes of fins
4.It can be programmed.
5.It can have shields or no shields
Product specifications:
| after-sale service |
yes |
mould |
can customise |
| Air pressure requirements |
0.8Mpa |
design style |
can customise |
| Voltage, power |
220V/50Hz,2.5kw |
Driving mode |
Servo Pneumatics |
| running speed |
adjustable |
Number of cylinders |
6--8 |
| production efficiency |
60sec. |
Core size |
can customise |
| Number of preset models |
200 |
Workstation |
1 |
| Programmable |
YES |
Maximum size of head plate |
120mm |
| brand name |
SUNHOPE |
Machine weight |
800kg |
| Safety device |
radiator core builder is equipped with photoelectric light curtain to protect the safety of the operator |
warranty |
12 months |
| Size of working station |
900*900mm |
Efficiency |
About 4-5 Minutes One Core
|
About us:
With our understanding of the industry, we have been helping foreign customers to set up radiator factories and provide the production machine in the region in the past five years. We provide customers with pre-sale and after-sale equipment design and service according to the size of our products.In the meantime we will also provide the material to our customers as well. We will send technicians to guide the installation on site to ensure the smooth production of the customer's factory, and provide free consultation service in case of any doubt in the production process.
FAQ:
1.Does one set of hob can use different thickness finned materials?
Yes,it can.But we don’t suggest big difference in thickness,most of the thickness of fins is 0.07-0.08mm at the moment.
2.Does the hob can have multiple fins with different width?
Yes,it does.One set of hob can be single width of fin,also can combine different width size of fins,most can combine 10 different width size of fin in one set of hob.
3.Does it can change the hob?
The hob is changeable,but the main console is the same,the position where the hob installed must match with the main console.
Your message must be between 20-3,000 characters!
