Automotive Aluminum Radiator Fin Forming Machine Touch Screen Operation
|Core Components||PLC, Motor||Fin Width||8~200mm (customized)|
|Fin Pitch||1.6~5.0mm||Tooling Material||Forged High Speed Steel (W6)|
|Fin Height||Max. 10mm|
Aluminum Radiator Fin Forming Machine,
Automotive Radiator Fin Forming Machine,
Touch Screen Radiator Fin Forming Machine
With the development of heat exchange industry, more and more countries and regions are committed to building local radiator condenser plants. With our understanding of the industry, we have been helping foreign customers to set up radiator factories and provide the production machine in the region in the past five years. We provide customers with pre-sale and after-sale equipment design and service according to the size of our products.In the meantime we will also provide the material to our customers as well. We will send technicians to guide the installation on site to ensure the smooth production of the customer's factory, and provide free consultation service in case of any doubt in the production process.
At the same time, our company provides customers with all kinds of radiator, condenser required hardware and plastic components. Ensure the supply and quality of finished products.
If you are interested in setting up a radiator factory in your place or buying any products , please contact us and we will provide you with the best service and best price.
1.Does the hob can have multiple fins with different width?
Yes,it does.One set of hob can be single width of fin,also can combine different width size of fins,most can combine 10 different width size of fin in one set of hob.
2.Does it can change the hob?
The hob is changeable,but the main console is the same,the position where the hob installed must match with the main console.
3.Does one hob can have multiple fin sizes with different heights?
No,one set of hob only can produce single height of one fin,up and down fine-tuning height is not more than 0.1mm.
4.Does one set of hob can use different thickness finned materials?
Yes,it can.But we don’t suggest big difference in thickness,most of the thickness of fins is 0.07-0.08mm at the moment.