5 Fins/Min Radiator Fin Forming Machine

Standard Structure Aluminium Radiator Fin Machine for intercooler

Product Features:

     The radiator fin forming machine employs a combined electrical and pneumatic control. The machine conducts an automatic cycle of feeding,

lubricant spraying, rolling and louvering, fin collection, fin crest counting and product counting, and cutting. The machine has both automatic and manual control available. At manual mode, the operator can conduct the above machine moves one by one. The machine is equipped with inching button on the main shaft.

     The running speed of the radiator fin forming machine is controlled by the inverter. Quantity of fin crests is counted through servo-worm electrical counter. There is a coil supporting and fastening device. The machine is also equipped with strip breaking and twining alarming system, and automatic halt function at sudden faults.

Product parameters:

Product features:

1.It can have multi blades,can do maximum 8-10 combination cutting.

2.Automatically cutting and counting

3.It can have 2 rows material rolls machine.

4.Size can be customized

5.It can be programmed.

6.It can have shields or no shields

7.high precision

8.high speed

9.can be customized according to customer requirements of different shapes of fins

About us:

     Our company is good at manufacturing all the process of the radiator tank production line.In recent years,many companies from other countries in the same industry also bought the CKD from us and purchased the machine equipment from us as well.

    At the same time, our company provides customers with all kinds of radiator, condenser required hardware and plastic components. Ensure the supply and quality of finished products.

    If you are interested in setting up a radiator factory in your place or buying any products , please contact us and we will provide you with the best service and best price.

FAQ:

1.Does it can change the hob?

The hob is changeable,but the main console is the same,the position where the hob installed must match with the main console.

2.Does one hob can have multiple fin sizes with different heights?

No,one set of hob only can produce single height of one fin,up and down fine-tuning height is not more than 0.1mm.

3.Does the hob can have multiple fins with different width?

Yes,it does.One set of hob can be single width of fin,also can combine different width size of fins,most can combine 10 different width size of fin in one set of hob.

4.Does one hob can have multiple fin sizes with different heights?

No,one set of hob only can produce single height of one fin,up and down fine-tuning height is not more than 0.1mm.